A Mansion for Building Your DIY Skills
dark mode light mode Search
Will gorilla wood glue work on plastic

Does Gorilla Glue Work On Plastic? [Read This First]

Gorilla Glue is a well-known super-strong glue frequently used to repair items such as shoes and toys. However, some individuals are still skeptical that it would function effectively on plastic.

In this post, we’ll examine whether gorilla glue works on plastic. First and foremost, it is essential to apprehend that gorilla glue is simply a temporary patch and should never be utilized as a long-term cure for anything.

Second, it is critical to remember that gorilla glue will not work on most plastics with a hard outer shell.

Does Gorilla Glue Work On Plastic?

Gorilla Glue can work effectively with some plastics. However, using it with polyethylene, polypropylene plastics, or rubber with a high oil or plasticizer content is not suggested. Gorilla Glue, on the other hand, makes products specifically for these materials.

Is Gorilla Glue Safe To Use On Plastic?

There’s no denying that Gorilla Glue is excellent. However, every product has limitations, and it would be unreasonable to expect Gorilla Glue to excel at everything. That’s presumably why the original formula’s popularity was shortly followed by the introduction of a slew of other items bearing the Gorilla Glue brand.

The original recipe does not work well on any plastic, and no Gorilla Glue product is specifically designed for certain types of plastic. Specific gorilla glue compositions are suitable for plastic.

The Gorilla Glue product portfolio is extensive. There are also other fundamental recipes for producing plastic. Each Gorilla Glue recipe has advantages and disadvantages that make it acceptable for some projects but not others. Similarly, each plastic composition creates a unique set of properties. As a result, certain combinations are effective while others are not.

Is It Plastic-Safe?

Gorilla Glue is a polyurethane glue that is claimed as plastic-safe. It is non-toxic and safe for the environment. It has been found in tests to be effective in bonding most forms of plastic.

How Do You Get Gorilla Glue Off Of Plastic?

Traditional Gorilla Glue is a polyurethane glue with a composition similar to expanding polyurethane foam.

Polyurethane glue expands and cures into a semi-hard hardness when it reacts with moisture in the air. The curing process cannot be reversed once it has begun, and no solvent can dissolve the adhesive. If you can get to the glue before it hardens, you should be able to remove the majority of it with a solvent.

Procedure for Removal

  1. To remove the new Gorilla Glue off the plastic, dampen a cloth with acetone, alcohol, or mineral spirits. Although alcohol and mineral spirits are typically harmless, acetone can dissolve some plastics; test the solvent on an inconspicuous spot first.
  2. Wipe away the adhesive using a solvent-dampened cloth.
  3. Using a razor knife or chisel, scrape cured Gorilla Glue from a hard plastic surface. Most of the time, this isn’t tough because polyurethane foams up as it heals and is rather easy to cut and break apart. Picking the dried glue with your fingers or a pair of pliers is another option for removing it from soft plastic.
  4. Remove residue from the surface using a spray lubricant and an abrasive sponge. The grease weakens the adhesive connection, making it easier to wipe the glue off.

Which Gorilla Glue Is Best for Plastic?

There are various causes why one would wish to put glue on plastic, ranging from damaged toys to house repairs.

However, finding the correct mix may be difficult with so many different types of plastic and adhesive. If you get it incorrectly, it can ruin your project by resulting in bonding that doesn’t hold or harm the plastic itself.

Finding the appropriate blend of glue and polymers is critical. That implies you must first determine the type of plastic you are working with.

White Gorilla Glue is generally the best sort of Gorilla Glue to use on plastic. This adhesive is excellent for joining porous and non-porous materials. It immediately dries and produces a solid connection.

  • Super Glue by Gorilla

Gorilla Super Glue is the go-to glue for many household applications due to its high strength and short set time. The transparent glue dries in 10-45 seconds and is designed for quick, long-lasting repairs.

This Super Glue has been strengthened for improved impact resistance to withstand bumps and drops. It applies to many materials, including plastic, metal, stone, ceramic, paper, rubber, and others. However, it is not suggested for use on polyethylene, polypropylene, or other comparable materials.

  • Gorilla Glue in White

White Gorilla Adhesive is a 100% waterproof glue suitable for indoor and outdoor usage and strong enough to withstand the environment.

The same serious power as Original Gorilla Glue, but in a whiter, quicker composition. White Gorilla Glue is a water-based glue. It is regarded as the best gorilla glue for plastics.

  • Clear Gorilla Glue

Clear Gorilla Glue is extremely strong, perfect for indoor and outdoor uses, and binds almost anything. It has a long working duration, allowing you to adjust your object. It also has a modest gap-filling capacity, allowing you to bond uneven surfaces.

Clear Gorilla Glue is water-resistant and can sustain periodic exposures, but it is not intended for continuous soaking.

  • Gorilla Super Glue Gel

Gorilla Super Glue Gel is a simple-to-apply, thicker, and more controllable formula that is ideal for various surfaces and vertical applications. The transparent glue dries in 10-45 seconds and is designed for quick, long-lasting repairs.

This super adhesive gel has been specifically designed to absorb spills and impacts. Super glue, also known as cyanoacrylate glue or CA glue, can be used on many materials, including plastic, metal, stone, ceramic, paper, rubber, and others. 

They have incorporated an anti-clog cap with a metal pin inside to provide an airtight seal for optimal reusability and its high-performance formula.

  • Gorilla Epoxy Glue

Gorilla 2 Part epoxy glue for plastic may be used to patch gaps, repair exterior siding, and bond plastic, wood, metal, ceramics, brick, stone, concrete, glass, and foam.

It comes in the shape of a dual-syringe with a combined plunger that pushes the resin and hardener out through the same location.

The epoxy hardens five minutes after mixing, giving you time to verify accurate placement before permanent adherence. Because the epoxy is water-resistant (but not waterproof), it may withstand outdoor use. It takes 24 hours for good plastic glue to dry to a totally clear, flawless finish.

  • Original Gorilla Glue

Gorilla Glue’s original recipe works well on “almost anything” and has “amazing, industrial holding strength and adaptability.” Plastics, on the other hand, do not fit under the category of “almost anything” due to the way Gorilla Glue’s original formula works and the physical qualities of plastic.

The original recipe is “a moisture-activated polyurethane adhesive.” That is, it functions best when connecting porous materials with latent moisture.


How Strong Is Gorilla Glue On Plastic?

Tensile strength keeps the glue adhered to the bonded object even after it has cured.

The tensile strength of Gorilla Glue varies based on the temperature and humidity conditions in which it is applied. However, Gorilla Glue should have a tensile strength of between 2,400 PSI and 3,300 PSI (70 degrees F) when used at ambient temperature.

Can Gorilla Super Glue Be Used On Plastic?

According to the manufacturer, Gorilla Glue is compatible with many polymers. However, it is not suggested for use with polypropylene, polyethylene plastics, or rubber with a high oil or plasticizer content. However, the firm does manufacture goods specifically for these materials.

What Doesn’t Gorilla Glue Stick To?

Gorilla Glue is a well-known, high-strength glue. However, it will not adhere to some surfaces. These include greasy surfaces, silicone surfaces, and surfaces with high polarity.

Furthermore, Gorilla Glue will not adhere to wet or highly moist surfaces.

Why Can’t Gorilla Glue Be Used On Plastic?

There are certain hazards to utilizing gorilla glue to connect plastic.

  • The first is that glue may be quite powerful and difficult to remove, potentially damaging the plastic if not done correctly.
  • Second, gorilla glue may be harmful if consumed, so prevent contact with the eyes and mouth.
  • Finally, because gorilla glue emits dangerous fumes, it must be used in a well-ventilated environment.

How Long Does Gorilla Glue need to Dry On Plastic?

When using Gorilla Glue on plastic, it normally takes a day to dry. Although, this depends on the humidity and temperature conditions in the surrounding environment.

Generally, the greater the humidity and temperature conditions, the longer Gorilla Glue will take to dry.

Plastic Glue Vs Super Glue

Gorilla Super Glue is a cyanoacrylate glue, whereas Gorilla Glue is a polyurethane adhesive. Gorilla Super Glue, unlike Gorilla Glue, does not require a prolonged clamp time or moisture to activate. It does not froth throughout the installation process.

Furthermore, Gorilla Super Glue is only suggested for indoor use and is best suited for modest repairs that require a fast connection and jobs that do not require clamping.

What Should I Do If I Get Plastic Glue On My Hands?

If you get plastic glue on your hands, immerse them in warm water and massage the glue away. If this fails, use acetone (nail polish remover) to remove the adhesive, wash your hands well afterward, and use moisturizer because acetone is drying the skin.

Does Gorilla Glue Work On Plastic Models, Glasses, Dishes & Toys?

According to the manufacturer, Gorilla Glue is compatible with many polymers. However, it is not suggested for use with polypropylene, polyethylene plastics, or rubber with a high oil or plasticizer content. However, the firm does manufacture goods specifically for these materials.

Is Gorilla Glue Effective on Acrylic Plastic?

The efficacy of Gorilla Adhesive on acrylic plastic is determined by various factors, including the type of Gorilla Glue used, the quality and thickness of the acrylic plastic and the amount of time required for the glue to cure.

Some users report that Gorilla Glue may attach acrylic plastic surfaces effectively, while others say that the adhesive separates or cracks quickly.

What Works On Polyethylene Or Polypropylene Plastics?

Prepping the surfaces to ensure the greatest possible odds of a firm connection is the finest advice we’ve discovered for gluing PP and PE plastic.

After that, you’ll need to apply a plastic adhesive primer to each surface.

Once the primer has dried sufficiently to become sticky, a liquid plastic glue must be used.

Once the connection has been formed, it must be clamped until it has had time to cure.

Will Gorilla Epoxy Glue Plastic?

Gorilla Epoxy works nicely on many types of plastic (roughen surfaces before bonding). However, it is not suggested for use on PVC pipe, polyethylene (PE) and polypropylene (PP) plastic, or some types of rubber with a high oil or plasticizer content.

Will Gorilla Glue Work on PVC?

We recommend Gorilla Glue PVC Cement for gluing PVC pipes. This is the device that DripWorks uses to connect drip irrigation fittings. It is non-flammable, nearly odorless, and user-safe, and no priming is required.


Gorilla Glue excels in a wide range of tasks. The original recipe is well-known for its strength and adaptability.

When you combine it with a comprehensive line of specialized adhesives, epoxies, and tapes, you have a brand that earns a great reputation. It may not perform well with plastic surfaces, such as polyethylene and polypropylene. To ensure that the Gorilla Glue adheres well, sand the plastic covers.

Leave a Reply

Your email address will not be published. Required fields are marked *