A toilet flange or a closet flange could be defined as a pipe fitting that secures the toilet to the floor as well as connects it to the drainage.
Toilet flanges have become an integral part of modern-day bathrooms. If you have not invested in one, you have to deal with various problems, especially sewer leaks.
The following write-up specifies if a toilet flange goes on top of the tile or the flush. Please check it out right now.
Does the toilet flange go on top of the tile or flush?
Toilet flange on top of tile or flush – a large number of individuals type this particular statement online because they are not sure where a toilet flange is located. Well, according to the best interior designers & decorators, a toilet flange must always go on top of the tile.
A toilet bowl is attached to the flange with wax rings. Wax rings seal the flange to the pipes in the lower level. Installing the flange beneath the tile or the flush can pave the way for drainage complications.
Should the toilet flange be flush with tile? Is the toilet flange supposed to be flush with the floor?
Make sure that the flange does not go under or over the tile. As mentioned in the previous section, a toilet flange will function seamlessly only if it is on top of the tile. In other words, there is no way you can flush it out together with the tiles.
Flushing the flange with the floor does not seem viable. Practically all the bathroom floors nowadays are tiled. The flange is installed on the main floor even when it is of any other type. Remember, you have to deal with lots of issues if you decide to flush the flange together with the floor.
Reasons why the toilet flange goes on top of the tile
Toilet flanges go on top of the tile because of the following reasons –
There is no better way to do it:
The experts have said that the best way to install a flange is by placing it on top of the tiles. All the other methods will lead to leakage.
Toilet and Toilet Flange reside on the same floor:
Please adhere to instructions when placing the flange. Both the toilet and flange must sit on top of the tiles. Leave behind 1/4th inch space on the upper part.
Designed for Strong mounting:
When the toilet flange is mounted on top of the tiles, the toilet will be able to endure heavyweights.
To prevent leaks:
Once again, placing the flange on tiles can prevent water leakage. You would not want wastewater throughout the bathroom, right?
How can you install a toilet flange on tile?
Should toilet flange be flush with tile? You already know the answer to it. Now for installing a toilet flange on the tile, you must carry out the below steps as diligently as possible.
Start by turning off the main water supply and flushing the toilet until it has emptied. You need to collect screwdrivers, drill machines, screws, toilet flanges, tape measures, and glue. When working, please put on a mask, gloves, and safety goggles.
Cut throughout the tiles:
If the tiles in your bathroom are huge, you must cut the flange evenly. In this way, the flange will attach to the pipe quite easily. Also, as the flange will be installed outside the pipe, you must clean the surrounding area.
Glue the toilet flange:
Use high-quality glue to stick the flange on the inside and outside of the pipe. Before you do so, please get rid of the accumulated dirt and dust. Finally, attach the flange to the drainage system.
Screw the flange into the floor:
All toilet flanges have four to six holes where the screws go. If you are installing the flange on the new floor, you must drill enough holes in it. Diamond-tipped drills can penetrate tile, bone, and glass.
Mount the toilet:
Mount the toilet as carefully as possible. Apply a substantial amount of pressure so that the toilet goes down. The tension secures the seal in no time. Align the bolts. The toilet must not leak when you have turned on the water supply.
Where is the toilet located?
By now you know the answer to the most commonly asked question – should a toilet flange sit on top of tile? Still, it is necessary to be aware of the exact location.
A toilet flange lies beneath or at the base of the toilet bowl. A wax ring connects the flange and base. As per the latest studies, most toilets are equipped with a flange above the floor, around 1/4th to 1/8th of an inch above. The flange reaches the underground pipe from there.
How can you level a toilet flange?
To level the toilet flange, you have to carry out the four steps below.
Check the condition:
Check the condition of the toilet. Sit on the toilet and move from one side to another and back and forth. If you notice wobbliness, your toilet will need leveling. Do minor adjustments and if the toilet feels uneven still, you have to call a professional for extensive adjustments.
Remove the old toilet flange:
You must remove the old flange. For this step, it is better to call a plumber. Otherwise, you may end up damaging the pipes.
Level down the flange:
If the flange is a bit high, you must remove the first pipe. Now cut the excess part with a saw. Make sure it is parallel to the floor. Then cut off the tiles, please replace the flange.
Level up the toilet flange:
You have to put in a lot more effort if the flange drops down. Fill the upper portion of the floor. When installing the flange, please ensure it is adjacent to the tiles.
Final Thoughts
When renovating the bathroom, you must keep in mind two essential factors – functionality and aesthetics. Now if something is not aesthetically appealing, you must at least make sure it functions without any hassle.
Choosing the best position for the flange can be a tad challenging and all the possible solutions have both pros and cons. Anyway, the best among the lot is installing the flange on top of the tile. I hope the above write-up provided all the information regarding it.
